The SD600 series solar pump inverters is a low voltage pumps inverter of 0.3 to 400KW above rating designed to operate with energy drawn from solar panel or photovoltaic cells (PV).
The inverters is customized to operate in dual supply mode (Ac and DC), so the grid connected supply is used in the absence of energy from PV cells. This drive functions with the latest in technology maximum power point tracking (MPPT) algorithm to derive maximum power from the PV cells at any instant.our solar pump inverter are your best choice.sametime support three phase 380V or Single phase 220V submersible deep well pump into solar water pump system.It works this way that direct current produced by solar module inputs into alternating current which drives all kinds of water pump ,it has new software protect the pump once the water is empty.
Solar Water pump inverter with effective protection function,including PV over-voltage protection,over-current protection,auto derating against over-temperature,etc.
Solar pumping system inverter with advanced MPPT algorithms:Solar maximum power point tracking efficiency reaches 99%
Solar water pump inverter support GPRS module,which can remote monitor the controller by using the APP.
Solar water system pump inverter with the solar pump controller automatically start or sleep only after being connected to solar panel without any parameter setting.
Solar water system pump inverter Model(=2.2KW)can be configured with the boost module,which can make the pump work in low voltage and reduce the cost by decreasing the numbers of solar panel.
Solar water pump system inverter with optional cabinet product for IP65 protection level.
our software can be protect once the bucket drying.
MPPT control mode, adjust the output frequency to the appropriate frequency in real-time.
Complete water pump protection functions extend the life of the water pump.
The Custom PQ curve allows users to understand information such as accumulated flow and power generation.
Multiple functions such as AC/DC mixing, timing, cleaning, etc. meet market demand.
New software and added performance points
1.Dry run (under load ) protection, Pumps loss phase protection, over current protection...
2.Pumps maximum current protection
3. Low input power protection
4. Lowest stop frequency protection
5. The PQ (power/flow) performance curve enables calculating the flow output from the pump
6. Digital control for fully automatic operation, data storage and protective functions
7.Intelligent power module (IPM) for the main circuit
8. LED/LCD display operating panel and support remote control
9. Low water probe sensor, and water level control function
10.Strong lightning protection
11. Easy operation and Voc voltage auto detection function
Technology support of solar mppt Inverter
| 400V Motor | 220V Motor |
Maximum input voltage (Voc) | 900 VDC | 440 VDC |
Minimum input voltage | 250 VDC | 150VDC |
Recommended voltage DC (VMPP) | 300-750 VDC | 200-400 VDC |
Nominal input voltage AC | 3ph 380-450 V,50/60 Hz | 3ph 200-240 V,50/60 Hz |
Nominal output voltage AC | 3ph 400V | 3ph 200V |
Output frequency | 0-400 Hz |
Efficiency(inverter) | 97-98% |
Ambient temperature range | -10 to 50°C |
Cooling | Natural / by means of internal fan |
Recommended input power | 1.2 times the pump capacity (minimum) |
Warranty | 1.5 years |
Output rector | optional (same power as inverter power,for distance over 70 m) |
IFIND agricultural irrigation solar pump inverter is specifically designed for photovoltaic water pumps, with high MPPT efficiency and low failure rate. With the addition of AC DC function Support 220V and 380V sametime,also have the protection software for dry application. it truly achieves seamless switching between AC and DC, achieving an MPPT efficiency of 99%.
