IFIND elevator inverter controller are high performance closed loop vector vvf inverters, designed for elevators, for controlling asynchronous AC induction motors and permanent magnet synchronous motors. They apply the most advanced senseless vector control which follow the leading international level. They are suitable for Villa elevators, residential elevators, commercial elevators, cargo elevators and various speed occasions, it is adapable with multiple of PG cards(AB, ABZ, Endat 1313, Sin/Cos 1387) for gearless and gear motor.it also can be support industry UPS software and home UPS software.
Main Features Of Made in china China factory 1387 PG card Close Loop drive Inverter
Non-rotational encode phase offset tuning
Flexible, programmable I/O's
Onboard Modbus-RTU
Comprehensive trip diagnostics
Built-in dynamic braking unit
Anti-rollback function for PMSM gearless machines
Pre-torque function (analog signal from load cell for geared machines
Smooth ride performance
Five independent S-ramps
Easy set-up with default factory setting
Light load direction for rescue function
Integrated Break control
220 Vac UPS (Sine & quasi square type)
Support Synchronous and asynchronous motors.
Suitable Heidenhain encoder. use 1313 PG card.
HARDWARE OF PRODUCT
| IGBT | STARPOWER/ INFINEON/FUJI/CHINESE BRAND |
| FAN | PELKO/NIDEC/OTHER CHINESE BRAND |
| CAPACITORS | RUBYCON/JIANGHAI |
| ELECTRONIC | DELTA |
Technology support of China factory 1387 PG card Close Loop drive Inverter
Voltage class | 220VAC | 380 to 480AC |
Drive Model | SD320L 3.7KW-2 | SD320L 5.5KW-2 | SD320L 7.5KW-2 | SD320L 3.7KW-4 | SD320L 5.5KW-4 | SD320L 7.5KW-4 | SD320L 11KW-4 | SD320L 15KW-4 |
Dimension | Height Width Depth | [H]:250mm [W]:160mm [D]:183mm | [H]:320mm [W]:220mm [D]:183mm | [H]:250mm [W]:160mm [D]:183mm | [H]:320mm [W]:220mm [D]:183mm |
Mounting Hole | Ф5 | Ф6 | Ф5 | Ф6 |
Drive Input | Rated Input Voltage | Three-phase 200Vac to 240Vac,-15% to +10% (170Vac to 264Vac) | Three-phase 380Vac to480Vac,-15% to +10% (323Vac to 528Vac) |
Rated Input Current,[A] | 10.5 | 14.6 | 26 | 35 | 10.5 | 14.8 | 20.5 | 29 | 36 |
Rated Input Frequency | 50/60Hz,±5%(47.5 to 63Hz) |
Drive Output | Applicable Motor | [kW] | 2.2 | 3.7 | 5.5 | 7.5 | 3.7 | 5.5 | 7.5 | 11 | 15 |
[HP] | 3 | 5 | 7.5 | 10 | 5 | 7.5 | 10 | 15 | 20 |
Output Current,[A]*1 | 9 | 13 | 25 | 32 | 9 | 13 | 18 | 27 | 33 |
Power Capacity,[kVA] | 5.9 | 8.9 | 17 | 21 | 5.9 | 8.9 | 11 | 17 | 21 |
Overload Capacity | 150% for 60 Sec &180% for 3 Sec |
Max. output voltage | Three-phase 200Vac to 240Vac (Proportional to input voltage) | Three-phase 380Vac to 480Vac (Proportional to input voltage) |
Max. output frequency | 100 Hz |
Braking Resistor | Recommended power,[W] | 500 | 750 | 1200 | 1500 | 750 | 1200 | 1500 | 2500 | 3000 |
Recommended Resistance,[Ω] | ≥65 | ≥45 | ≥22 | ≥16 | ≥130 | ≥90 | ≥65 | ≥43 | ≥32 |
Enclosure | IP 21 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PG CARD OPTIONS
IFIND CLOSE LOOP INVERTER is a high performance closed loop vector control AC drive, designed for elevators to control asynchronous AC induction motors and permanent magnet synchronous motors. it can be suitable for AB pg card,ABZ pg card,1313 pg card or 1387 pg card.The advanced senseless vector control technology which follow the leading international level is applied for this elevator inverter.It is your best choice for industry control application.
